Cara Setting Router Wifi Tp Link Tl-wr941nd
The TP-Link TL-WR941ND Wireless N Router is a wireless router that supports the Draft N 2.0 specification and not much else. This means no network storage or dual-band support (the router works only in the 2.4GHz frequency), no print-serving capability, and no Gigabit Ethernet. The router doesn't even offer N-mode-only operation, in which Wireless-N routers can show off their N throughput speed without being interfered with by legacy clients. Instead, the TL-WR941ND works in mixed mode, where it supports both Wireless-N and Wireless-b/g clients. The TP-Link does, however, offer Wi-Fi Protected Setup, long-range, above-average throughput performance, and a stable signal. For about $60, the router is one of the most affordable Wireless-N routers on the market. For another $30 or so, though, we'd recommend the, which has a much longer list of features and a better design.
Design and ease of use The TL-WR941ND has the typical design of a wireless router from a few years ago; it's a squarish box with three antennae on the back-crowding the network ports-and an array of LED blue indicator lights on the front. In its defense, however, the new, true dual-band has the same design, but with a slightly smaller footprint. Generally, we prefer a more compact design, with the antennae hidden inside the casing (or at least placed on the side), away from the ports, as with the Linksys WRT310N or the dual-band. The TL-WR941ND doesn't come with much. Inside the box you will find the router itself, a power adapter, a little Quick Installation Guide booklet, and a software CD that contains nothing but manuals of virtually every TP-Link router in PDF format. Nonetheless, it's easy to set it up by following the setup guide, and to configure the router using the Web interface.
It took us just a few minutes to get the device up and running. Unlike the D-Link DIR-855 or the Linksys WRT310N, the TP-Link TL-WR941ND doesn't have a desktop setup application, so you'll need to stick with the Web interface.
Features On the front, near the blue LED lights, the TP-Link TL-WR941ND features a Quick Secure Setup (QSS) button, which is essentially the push button for its Wi-Fi Protected Setup (WPS) feature. By pressing this button, you instigate a window of a few minutes where WPS-compliant clients can join the wireless network without you having to enter the encryption key-a simple, yet secure, method for adding clients to your network.
Through the web interface. Open a browser and navigate to the web interface of the router (check default settings below). In the menu look for System tools and under there find the Factory defaults option. On the Factory defaults page click on the Restore button to perform the reset. Withe the RESET/WPS button.
Tp Link Wireless Configuration
Have the unit powered on. Press and hold the reset (sometimes reset/WPS) button for 10 seconds with a paperclip or other sharp object.
When the SYS led start blinking quickly release the reset button and wait for router to boot back up. The 30-30-30 reset If the above instructions don't work you can always try the 30-30-30 reset as follows:. When router is powered on, press the reset button and hold for 30 seconds. (Use a paper clip or something sharp). While holding the reset button pressed, unplug the power of the router and hold the reset button for 30 seconds. While still holding the reset button down, turn on the power to the unit again and hold for another 30 seconds.
This process usually works for resetting any router to it's factory setting. Note: It is worth reading more about and what the risks and considerations are when resetting your router this way, instead of just rebooting it. How to login to the TL-WR941ND v3.x To login to the 300Mbps Wireless N Router and change the settings, you can follow these steps:. Make sure you are connected to the router's network, either by Wi-Fi or ethernet cable. Open your browser and visit. You should be prompted with a login dialogue. Enter the username: admin and the password admin Note: If you have already changed the password use that instead.
Router Wifi Philippines
You will now be logged in. If you haven't yet changed the defaul password, we recommend that you change it first thing you do after logging in. If these instructions don't work for your router, you can always try a factory reset to get the default, or try some other common, as they can usually be shared across models/variants.
TL-WR941ND v3.x Firmwares Staying up to date with the latest firmware is a good idea to keep your router even more secure from various security flaws. If you want to squeeze a little bit of extra functionality out of your router, consider flashing an open-source firmware like dd-wrt, openWRT or LEDE. Flashing a custom ROM can greatly increase the stability and functionality of your old router. Following are the firmwares that we have identified existing for the TP-LINK TL-WR941ND v3.x: Flashing OpenWrt on the TP-LINK TL-WR941ND v3.x The TP-LINK TL-WR941ND v3.x is supported by OpenWrt according to their Table of Hardware. So flashing OpenWrt onto it should be quite straigthforward.
We couldn't find any specific instructions for flashin OpenWrt on the TP-LINK TL-WR941ND v3.x, but since it's listed in their Table of Hardware as supported, you can head over to the and read on there. Note: Flashing custom firmwares is always on you're on own risk. Make sure to read OpenWrt's wikis to understand the risks and how to proceed if something goes wrong. Flashing LEDE Project on the TL-WR941ND v3.x The TP-LINK TL-WR941ND v3.x is also supported by the LEDE Project. To install LEDE aquire the correct firmware from their page and then follow the instructions on their Note: Make sure to read the LEDE wikis carefully before flashing.